Step 1: Put the middle rack of the juicer vertically, and then align it with the main unit to install the device.

​​

Step 2: After the assembly is completed, align the bottom of the juicer's juicing net with the motor wheel of the juicer, and then press it. When pressing, the force must be uniform to ensure that it is pressed in place, and then rotate manually. See if you can scrape the middle rack.

Step 3: Install the top cover of the juicer and fasten the safety buckle.

Step 4: Turn on the juicer and see if it works properly.

Step 5: Remove the skin of the prepared fruits and vegetables, and cut the larger ones into smaller ones with a knife.

Step 6: After putting in the fruit, turn on the juicer and put down the push rod.

Step 7: After frying the fruit into juice, you can drink it.